|
|
|
|
|
|
Specifications
DNA |
Single Ended Class A1 hybrid power amplifier with separate power supply.
|
|---|---|
Output power |
Greater than 70W. Power delivery maximised for 3 to 7 ohm loads
|
Gain |
25.5dB SE in or balanced in, voltage mode.
10V/mA in current mode.
|
Input impedance |
30K Ohms, Voltage mode, 50 ohms current mode.
|
Output impedance |
Less than 0.07 ohms 20 Hz to 20Khz.
|
Signal to Noise Ratio |
Greater than 115dB A weighted at nominal output.
Greater then 97dB A weighted at 1W/8 ohms
|
Power response |
Less than 5Hz to greater than 200KHz.
|
Power consumption |
1000 Watts at any volume into any load.
|
Size |
380mm wide, 256mm high, 550mm deep (each of 3 units)
|
Weight |
Power supply: 40Kg
Mono amps: 20Kg each
|
Operating environment |
Operating temperature 0 to 35 degrees Celsius.
Altitude sea level thru 3000m above sea level.
Storage temperature –20 to +50 degrees Celsius.
|
